About Us
  Products
Contact Us
Home
 


Overview Description Features Technical  
 
 
TECHNICAL SPECIFICATIONS
Unit Dimensions
IP406 V2, IP412 and all Expansion Modules
17.5 W x 2.8 H x 9.7" D (445 x 71 x 245mm)

Minimum clearance front and back: 3" (75mm)
IP Office - Small Office Edition
10.0 W x 3.0 H x 9.5" D (255 x 76 x 241mm)

Minimum clearance front and back: 3" (75mm)
IP Office 500
17.5 W x 2.9 H x 14.4" D (445 x 73 x 365mm)

Minimum clearance front and back: 3" (75mm)
Weight
IP Office 500 System Unit
7.0lbs/3.2kg
IP406 V2 Control Unit
6.7lbs/3.0Kg
IP412 Control Unit
6.7lbs/3.0Kg
IP Office - Small Office Edition
2.6lbs/1.2Kg
Analog 16 Module
6.5lbs/2.9Kg
DS 16 Module
6.7lbs/3.0Kg
DS 30 Module
7.8lbs/3.5Kg
WAN3 Module
6.3lbs/2.8Kg
So8 Module
6.3lbs/2.8Kg
Phone 8 Module
6.3lbs/2.8Kg
Phone 16 Module
6.5lbs/2.9Kg
Environmental
Phone 30 Module
6.94lbs/3.1Kg
Temperature
32° to 104°F (0° to +40°C). 95% relative humidity, non-condensing.
Interface
DTE Port
  • 25 way D-Type female connector, V.24/V.28
  • 9 way D-type on IP412, IP406 V2, IP Office 500 and IP Office - Small Office Edition
ISDN Ports
EU Interfaces:
  • BRI: RJ45 sockets. ETSI S/T Interface to CTR3 for Pan European Connection
  • PRI E1: RJ45 socket. ETSI S/T Interface to CTR4 for Pan European Connection
  • PRI T1/J1: RJ45 socket: FCC Part 68/JATE connection

USA Interfaces:

  • PRI T1 Service: Ground Start (GS) - Default, E&M, 56k data for 5ESS, 56/64/64 restricted for 4ESS
  • PRI ISDN Switch support: 4ESS, 5ESS, DMS-100, DMS-250 (includes conformance to ANSI T1.607 and Bellcore Special Report SR4287, 1992)
  • PRI ISDN Services: AT&T Megacom 800, AT&T WATS (4ESS), AT&T SDS Accunet 56kB/s and 64kB/s (4ESS), AT&T Multiquest (4ESS)
Analog Trunk Ports
RJ45 sockets: Loop start/Ground start (regional dependant)
Power Fail Ports
RJ45 sockets
ISDN Data Rates
  • BRI: B-channel 64kbps or 56kbps, D-channel 16kbps
  • PRI: B-channel 64kbps or 56kbps, D-channel 64kbps
Analog Phone Ports
  • RJ45 sockets
  • CLI Schemes: DTMFA, DTMFC, DTMFD, FSK and UK20
  • REN: 2 (External Bell via POT port: REN = 1)
  • Off Hook Current: 25mA
  • Ring Voltage: 40V (nominal) RMS
LAN
RJ45 sockets. Auto-negotiating 10/100 BaseT Ethernet (10/100Mbps)
WAN
  • Small Office Edition: RJ45 Ethernet socket
  • IP406 V2 and IP412 (optional on Small Office Edition): 37 way D-Type female sockets. X.21 interface to 2048k bps, V.35 interface to 2048Kbps and V.24 Interface to 19.2Kbps
Audio
  • 3.5mm Stereo Jack socket. Input impedance - 10k /channel
  • Maximum AC signal - 200mV rms
External Output Port
  • 3.5mm Stereo Jack socket. Switching Capacity - 0.7A
  • Maximum Voltage - 55V DC. On state resistance - 0.7
  • Short circuit current - 1A. Reverse circuit current capacity - 1.4A
Wireless Module
Small Office Edition only
  • 16bit Type II PCMCIA format PC card
  • IEEE 802.11b WiFi
Embedded Voice Memory
  • Small Office Edition: 64MB Flash memory, 16bit Type II PCMCIA card
  • IP406 V2 and IP Office 500: 512MB Compact Flash memory card